Social Media Roundup: Tom Curren Skip Frye Fish and More

Greetings, Shredderz! If you don’t already follow me on Instagram, I humbly ask you to check out my IG page, where I post a vintage surfboard daily. More to the point, here are some of my favorite Instagram posts from recent history:

Here’s a great post that shows some detailed pics of the famous Skip Frye fish that was surfed by both Tom Curren and Derek Hynd. Curiously enough, I can’t find a ton of definitive info on the board, which you would think would be pretty easy, considering it had two well-known owners and was featured in Andrew Kidman’s “Litmus.” The Frye fish is also not to be confused with the Tommy Peterson “Fireball Fish” that Curren famously rode in maxing Indo in the mid-Nineties. (There’s a long thread on the Surfer Forum that contains some additional context.) Finally, Kidman’s site has a pic that indicates there were two Skip Frye fish shaped for Curren and/or Hynd. Long story short, I might not have the entire story straight yet, but you can’t go wrong with a pic of Tom Curren holding a Skip Frye fish! Photo at the top of the page by Ted Grambeau and originally featured in Surfer Magazine.

Sometimes I can’t shake the feeling that Tom Morey, despite his status as one of surfing’s all-time innovators, is still underrated. That board looks insane even from a cursory glance, and when you realize it was made in 1969 that’s when the alarm bells start going off. It’s a gorgeous photgraph, too.

And while we’re on the subject of fishes, here’s a stunning board posted by Orange County surfer, artist and shaper Tyler Warren. I love the Yater-style logo, and the red color is just too clean and classy. If you dig into the comments there’s a bit of lively debate about the board’s origins, and it seems like the board could have been shaped by Rich Pavel, not Steve Lis. Regardless of the back story, I’d love to have that sled in my quiver.

View this post on Instagram

And then there were two. Lucky enough to score another Rainbow Hynson this week. The one with the opaque deck shaped in 1970, spray by Ogden and pin line by @tapedoff . Board #100 The other is also a 1970 Rainbow Hynson airbrush John Bredin board #126. Reached out to John Bredin and this is what he said about the board: Ahh, thanks Luke, yes that’s definitely one that Hynson and (Steve Moray possibly) shaped, I sprayed and Peter Pinline did the ink work on for Rainbow. The 7 chakras leading to expanded consciousness. Looks like it had the nose weight slot? Take a shot of it straight on for me if you can. Looks pretty faded which is unusual, they seemed to hold up pretty well. Have you shown it to John Frazier? He’s got several of the old ones too. Currently owns Rainbow label. I love getting the credits from Sam Cody and Peter St. Pierre when people ask about the old days. It all started in the Surfboards Hawaii factory. Takayama is still using the logo I did for Donald back in that factory. There were some really nice Casters done after the Rainbow era. I did some for Chris O’Rourk. There were some private ones that Hynson shaped and I sprayed for locals we knew that we ran through the Bahne shop that had no logos on them. A couple for a guy named Hopper with the infamous “black dot” crew’s logo. One of those found its way through Steve Clark to the surfboard history museum in Oceanside. Steve had to explain to them that the black dot WAS the logo. I tried to get into selling my work to the photoprint process but didn’t have much luck at it. I’ll attach one I did for that. Also check my site for more recent commercial work and fine art painting. I collected a few images of Rainbows I did when I came out there for the California Gold Surf Auction and they auctioned off one of Johnny Gail’s personal boards that had that sort of pinlining on it. #vintagesurfboard

A post shared by Luke (@surfncbs) on

Finally, we have a pair of Mike Hynson Rainbow Surfboards sticks with some truly next level airbrushes. As far as psychedelic artwork goes, I’d have to say that Rainbow Surfboards probably takes the cake. The caption contains some nice history on the Rainbow label, too.

Dick Brewer Trio (With Rich Pavel Cameo!)

Greetings, Shredderz! Today’s post brings you a fearsome threesome from one of the most illustrious Hawaiian shapers ever: Kauai’s own Dick Brewer. There are two Brewer guns for sale on Craigslist in San Francisco. Pictures below are via the respective Craigslist listings: board #1, board #2, and board #3.

Dick Brewer Surfboard #1: 7’6″ Thruster (Craigslist)

Two things stand out to me about this Dick Brewer gun: first, it’s in great condition. Second, the seller is asking only $275! If you look at the first picture, you can see a Dick Brewer signature in pencil on the stringer. There’s no closeup of the signature, but from what I can see, it looks identical to verified Brewer signatures on other hand shapes I have seen. Here’s an example of a Brewer signature from post-2007 on a board that was sold at auction. I’m not sure when the board above was shaped. My guess is sometime after 2000.

Dick Brewer Surfboard #2: 8′ Gun (Craigslist)

Dick Brewer 8' Gun.jpg

The gun is being offered by the same seller as the 7’6″ thruster above. Unfortunately, there are no photos of the fin setup, so it’s unclear if this is a thruster. This board is also cheap — the seller is asking $300. There’s an interesting detail on this board, which is the Choice logo located just above the tail. Choice Surfboards is one of the labels run by Rich Pavel (the others being Greenroom Surfboards and Pavel Surfboards). More on the Choice Surfboards tie-in below! The board also bears a Dick Brewer signature that looks like it was done in pencil. Finally, I think the 8′ gun and the 7’6″ board were likely shaped around the same time period.

Dick Brewer Surfboard #3: 8′ Thruster (Craigslist)

Finally, we have another 8′ gun on Craigslist. It is listed at $700. The board in the pictures above is also in the San Francisco Bay Area, but it is being offered by a different seller. My guess is the above board was shaped sometime in the 1990s. Either way, it looks like it is an earlier example than the other two boards written up on this post. In addition, the 8′ thruster above solves the mystery of the Choice Surfboards logo!

Dick Brewer Thruster 8'0" 3.jpg
Dick Brewer signature on the stringer. Above that you can see a logo for Choice Surfboards, which is one of the labels for which Rich Pavel shapes.

As you can see in the picture above, the Choice logo reads “Shaped at Choice Shaping Studios: San Diego California.” At some point, Brewer must have shaped alongside Rich Pavel at Pavel’s shaping room in San Diego.

Here’s an example taken from a totally different board. In the picture below you’ll notice that Dick Brewer and Rich Pavel both signed a board.

Choice Surfboards Dick Brewer Rich Pavel Signature.png
This is a picture taken from a board that was listed on Craigslist a few months ago (and not one of the boards pictured above). This the only example I have seen of a board signed by both Dick Brewer and Rich Pavel.

I’m not sure the extent of Pavel and Brewer’s collaboration, but it’s the only example I have seen of a board signed by both men. If you have any info on Brewer’s time shaping alongside Pavel, please don’t hesitate to reach out and let me know!

Miscellaneous Dick Brewer Boards for Sale

There are a few other Dick Brewer boards currently being listed for sale, and I thought it would be interesting to compare prices. First, there’s a nice 7’1″ wing pin single fin for sale in San Diego. The price is $575 and you can find the link here. The 7’1″ wing pin, however, is shaped by Gary Linden, who is an accomplished big wave surfer and shaper in his own right. For those who aren’t scared off by the prospect of putting in work, there’s another Dick Brewer single fin for sale in San Clemente. You can find the link here. It’s only $40, but the tail in particular looks pretty busted up. There’s a 6’10” Brewer gun on eBay and the seller is asking $849. You can find a link to the 6’10” gun here. Brewer prices can be all over the map. I realize the miscellaneous boards I have linked to aren’t representative of the entire market, but I think it’s sufficient evidence to conclude the first two boards on this page (the 7’6″ for $275 and the 8′ for $300) are being offered at extremely attractive prices.

Shred Sledz Presents: July 17 Grab Bag

Greetings, Shredderz! It’s been a while since I put one of these together. What better way to stave off the slow and inexorable encroachment of the work week than by perusing some of the cooler vintage sticks to go on sale over the past few days? Here’s a little selection of boards that have caught my eye recently:

Town & Country Single Fin by Dennis Pang (eBay)

T&C boards have become incredibly collectible over the past few years. This is especially true of 80s T&C boards with outrageous spray jobs. Given the board above is a bit earlier than the most famous T&C models, I’m a little surprised that it seems to be commanding a premium with five days left to go in bidding, as the price is already north of $350. It’s also surprisingly small, clocking in at a cozy 5’9″. As an added bonus, the board was shaped by Dennis Pang (see here for an earlier post about his work for Surf Line Hawaii.)

 

Rick Hamon Surfing’s New Image Aipa Sting & 80s Single Fin (eBay & Craigslist)

I’ve written before about how to distinguish whether or not an Aipa sting has been shaped by the man himself. And while I think it’s useful to know whether or not a board is an Aipa hand shape, let’s not forget that there are plenty of other non-Aipa shaped boards that are still awesome. Pictured above is a Rick Hamon-shaped Aipa sting, under the Surfing’s New Image label, that recently sold on eBay. Asking price was $600 but the listing makes it seem as if someone came in with a higher offer. Hamon is a well-renowned shaper in his own right who can currently be found mowing foam at Rusty Surfboards.

The second board in today’s Rick Hamon doubleheader is a Surfing’s New Image 80s single fin that can be found on Craigslist in Charleston. The seller is asking $475. The board looks like it’s in absolutely beautiful condition. They say you shouldn’t judge a book by its cover, but hey, some covers just happen to be way more beautiful than others. The board has an interesting shape, too. It looks like Hamon’s take on the famous McCoy Lazor Zap model. I’ve reproduced a picture of one below, courtesy of excellent online vintage surf purveyor Von Weirdos.

McCoy Lazor Zap Von Weirdos.jpg
A real McCoy Lazor Zap. Note the similarities between this board and the Rick Hamon single fin above, from the geometric paint job down to the super wide swallow tail. Pic via Von Weirdos

 

Choice Surfboards Steve Lis Fish (Craigslist and Craigslist)

We’ve got two separate Choice Surfboards / Steve Lis fish here, both of which are linked in the header above. The blue quad fin on the left is 5’8″; the twin fin on the right with the wooden keels doesn’t have any dimensions listed. There’s no price on the blue board, and the twin fin is going for $1K. I’m not sure what to make of these Choice / Lis fish boards. As I wrote earlier, I’ve heard these Choice / Lis models are not shaped by Lis, but rather, made from a template he designed. If anyone has any additional info, please drop me a line!

Shred Sledz Presents: 3/19 Weekend Grab Bag (Pavel / Lis, Rick, Weber, Hobie)

Greetings, Shredderz! As your weekend comes to a close (it’s almost midnight here in California), here’s a selection of a few cool boards I saw for sale over the past few days.

Rich Pavel / Steve Lish 5’8″ Fish on Craigslist

This thing has already been sold, so there’s no link. It went for $700. This is a MUCH cleaner example of a Pavel / Lis / Choice fish than the one I featured a little while ago. This one has some really cool touches, like those glassed-on wooden hatchet fins, and a nifty older Moonlight Glassing logo.

This board is no longer for sale, but there are some nice reference points. First, Surfy Surfy has an old blog post on another Pavel / Lis / Choice board that was shaped in 1979. It looks very similar to the one above.

Finally, there’s another Pavel / Lis / Choice fish for sale in the Inland Empire, which you can find here. It looks very similar, but I think it’s overpriced at $1K. I believe the date on this board is wrong as well — I tend to believe sometime in the late 1970s or early 1980s is more accurate. Two other notes: the Inland Empire board was glassed at Diamond Glassers and it has a Clark Foam logo, so we know it’s pre-2005 at least (when Clark went out of business).

Hobie Silver Bullet on eBay

This thing is in impeccable condition. It might take a bold surfer to show up to a crowded lineup with this bright pink paint job and the heart-shaped patch on the deck, but that’s a small price to pay for a board in such great shape. The poster claims this was purchased in 1972 as an older stock board and was never surfed. It certainly looks all original. Sadly, it’s hard to find reliable info on Hobie boards online. The board is listed as 8’4″, and it looks like the Silver Bullet model was produced at least beginning in 1969. Check out the rad advertisement below. The only catch? The board is listed at $2,450…hope you brought your piggy banks with you.

s-l1600 (22)

Rick Longboard w/Atomic Logo on eBay

Rick "Atomic" Logo.jpg

I’d like to say one thing up front: the board at that link is in terrible condition. The price is indefensible, too. With that said, the board has a cool checkerboard fin, and it sports a variant of a classic Rick logo I haven’t seen before (see above). The logo above has atomic rings above it, a la the classic Greg Noll marque. Any time I find a logo that doesn’t appear on Stanley’s Surfboard Logos or Stoked-n-Board, I consider it a success.

1971 Weber Single Fin on Craigslist (Orange County)

The price on this bad boy is steep — $1400. But it’s in beautiful condition, and I just have a soft spot for the clean lines of 70s single fins. I love the contrast between the green pin lines and the yellow color on the  rails and the bottom.