Greetings, Shredderz! We’ve got a fresh batch of videos for your perusing pleasure. Without any further ado, here are some of my recent favorites:
Joel Tudor and son Tosh Tudor released a clip showcasing a recent Hawaii trip. Wish I knew more about the boards they’re surfing. I’m guessing at least some of the sticks were shaped by Stu Kenson and/or Todd Pinder (Tosh definitely had at least one Pinder-shaped surfboard for Pipe.) Tudor also posted a Stu Kenson-shaped Rick Rasmussen tribute, seen below, which I was hoping to see in the clip. Either way I love seeing these boards in some Hawaiian juice!
Mason Ho’s 2019 highlights are about as fun as you might expect. As an added bonus, Ho’s videos are some of the few surf clips I don’t have to watch on mute. It’s always nice to get some Jimi Hendrix alongside some top notch shredding. If watching Mason Ho surf doesn’t bring a smile to your face then you need to get your pulse checked.
We’ve covered Vissla’s “Start to Finish” series here before, and they’re back with a new episode featuring young surfer / shaper Derrick Disney. Disney walks us through some pretty funky designs. It’s cool and informative to hear Disney’s description of the theory behind the boards. He’s even better at surfing these boards than describing them. Sadly, the same cannot be said of yours truly, and that’s why I write a blog in my free time and Disney gets paid to surf.
Jamie O’Brien is probably best known for charging Pipeline death pits, putting soft tops through their paces, and his very successful vlog. He has also collected a bunch of rad boards, focusing on some awesome Eighties and Nineties pieces. For this entry, which is on Matt Archbold’s new “Archy’s Garage” YouTube channel, O’Brien and Archy link up and surf on some of Archy’s old equipment. Archy shows off a sweet Timmy Patterson-shaped channel bottom thruster from the late Eighties. Check out Patterson’s website for more shots of what he calls the Built for Speed model.
Greetings, Shredderz! Some of you may recall a gorgeous Phil Edwards Honolulu surfboard I recently wrote up, which remains one of my favorite boards I have featured on this blog. Well, I’m happy to report that the board has begun its journey back to Hawaii. The Phil Edwards Honolulu model made a pitstop in San Diego with none other than Joel Tudor.
The board was surfed but I understand the conditions weren’t anything to write home about. Even so I’m so stoked to think that this was probably the first time the board had seen the Pacific Ocean in at least forty plus years. I also can’t wait to see when it goes back into the water in Hawaii, too. Stay tuned for more.
Finally, if you look in the comments in the Instagram post above, it looks as if Tudor nabbed a template off the board. Excited to see what other designs this ends up inspiring.
Greetings, Shredderz! I’d like to welcome all of you to a brand spanking new series on the blog, titled “Shaper Spotlight.” Up until now, this humble blog has focused mostly on vintage surfboards. I think it’s also important to profile contemporary shapers who are building boards today. There’s a ton of rich history found in older surfboards, and that will always be a big part of Shred Sledz. That said, there’s only one way to ensure hand shaped surfboards continue to get their due, and that’s by supporting the talented craftsmen who build them.
Last month I took my first ever trip to Oahu, and during that time I was lucky enough to meet up with Todd Pinder, the man behind Surfboards by Todd Pinder. Pinder plies his trade in Honolulu, where he painstakingly crafts each and every board by hand. This doesn’t just apply to shaping, however — Pinder is one of those rare shapers who also glasses all of his own creations, too.
Pinder might be a modern surfboard builder, but he draws upon some very deep roots from years of living in Hawaii and working alongside some well respected folks, like Carl Schaper (pronounced Shopper) and Donald Takayama. Pinder also continues to provide boards for folks like Joel Tudor and his sons.
Pinder’s shop is filled with a bunch of rad vintage sticks. See below for a neat Seventies Greg Liddle single fin. I can’t recall off the top of my head whether it was a hull, but I really dig the unusual pattern on the deck. Click the photos below to enlarge.
I got to see the Bing David Nuuhiwa Noseriding model that Joel Tudor posted about below. Todd told me the Nuuhiwa is a little shorter than other stock DN Noseriding models from the same time period.
The single coolest board Pinder showed me was an insane Joe Quigg paddleboard. Make sure you click the photos below to enlarge, as they show off the paddleboard in a bit more detail. Check out the squared off tail. The Joe Quigg paddleboard has incredibly thick rails, and I think it’s about 12′ long, so there’s plenty of paddle power to spare. You can see Pinder posing alongside this board in the post at the top of the page.
Here are some earlier photos, via Pinder’s Facebook page, that show Joe Quigg alongside Todd and the paddleboard.
That’s not all Pinder had stashed away, however. Upstairs in his shaping room Pinder also had a Seventies Surf Line Hawaii single fin shaped by Buddy Dumphy and a Gordon & Smith Skip Frye from the late Sixties. Click the photos below to enlarge. I couldn’t quite figure out which model the G&S / Skip Frye board is — maybe a “Speed Board”? — but it’s interesting that it has a small text G&S logo, instead of the classic bow tie logo that we all know and love. Pinder tells me the outline on the G&S / Skip Frye board has inspired some of his own egg shapes.
If you’re still not satisfied, well, there’s more. Pinder also showed off a sick Morey-Pope Sopwith Camel. The Sopwith Camel is one of Tom Morey’s many quirky and incredible Transition Era shapes, featuring an early stringerless design. I could go on a rant about how Tom Morey might be the most underrated inventor in surfing history, but I’ll save that for another time.
And while Pinder’s shaping room is filled with vintage gems, I’m even more stoked about his current creations. I mentioned it earlier, but it’s worth repeating: Pinder shapes and glasses all of his boards. Yes, all of them. Surfboards are often marketed as bespoke goods, but the manufacturing reality can be the opposite. When you order a surfboard from Pinder, you know it was built by one set of very capable hands from start to finish. If you even have the slightest appreciation for craftsmanship, that should resonate with you. As a bonus, Todd is a very friendly and surf stoked individual.
If you’re in the market for a beautiful new board, hit up Surfboards by Todd Pinder and tell him we sent you! You can also follow him on Instagram here and on Facebook here. Thanks Todd for inviting me to your studio and for sharing the story behind some killer surfboards!